Process Liquid Filtration » Filter Housings/Vessels » Stainless Steel Bag Vessels
Stainless steel bag vessels
Bag filters are used typically for high flow rate applications
where quick and simple filter bag changeout is required.
Bag filters are unable to offer the same level of efficiency and degree of fineness
that can be achieved using a cartridge filtration system. However when it comes
to volume throughput and cost of operation then very little can beat a bag filter
installation.
We offer a range of bag filter housings that are designed to accept the main
industrial range of bag filter sealing mechanisms, whether it be the simple wire
neck ring or the more complex and more efficient moulded style of neck ring,
we will have a vessel to suit.
At the smaller end of the vessel range we have units available in
either stainless steel or moulded polypropylene. These have connection
options normally up to 1 ½" BSP thread and will accommodate
flow rates (viscosity =1cP) up to 5 cu.m/hour.
In the intermediate range we have industry standard single, double
and triple length vessels which will accept either standard 7" diameter
steel wire neck rings or moulded neck seal design. These vessels
will accommodate flow rates up to 50 cu.m/hour, the single and
double length units are available in 316L stainless steel or
glass fibre reinforced polypropylene. The larger triple length
unit is available in 316L stainless steel only.
For higher flow rate capabilities we offer vessels that contain
a multiple number of filter bags ( multi pods) with up to 12
double length bag units available as standard designs, and even
larger units able to be manufactured to special design.
Whilst not all designs are required to be manufactured to gain CE marking to
comply with PED, there are options within the range that will be CE marked signifying
their suitability for use with all Group 2 Fluids and gases and all Group 1 fluids
except those classified as oxidising or explosive.
To complement the vessel range we offer a range of filter bags
that give nominal filtration ratings in the range 0.5 microns
up to 1mm (see bag data for specific materials and micron ratings.
| 81 Series Mini Bag Housing | 84 Series Single Bag Housing | ||
|
|
 |
 data
sheet |
| 85 Series Single Bag Housing | 86 Series Single Bag Housing | ||
 |
data
sheet |
 |
data
sheet |
| 88 Series Bag Vessels | |||
 |
data
sheet |
||
