Polypropylene Cartridge Filter Housings

Cartridge filter vessels manufactured in polypropylene are used primarily for removing particulate matter from cold water supplies. The filter housing may be fitted with a wide range of filter cartridges which includes both disposable and reusable types. Disposable filter cartridges always offer the finest grade of filtration and with modern membrane technology we are able to offer filtration as fine as 0.04 microns. (four hundred thousandth of a millimeter).

If you choose a reusable filter cartridge then we can also offer filter housings that will provide a level of backwashing which means not having to remove the cartridge for cleaning.

This filter vessel range will accommodate pipeline sizes from 1/4″ up to 1 1/2″ and flow rates up to 6000 litres per hour. The standard temperature limit for polypropylene filter housings is 50 deg C. If you need to filter hot water then we have a range of Hot Water Filters that will allow you to filter up to 93 deg C.

Polypropylene Filter Housings

Polypropylene Filter Housings – PDF downloads

ProductApplicationPDF
Model A102Two piece single cartridge, industrial style cartridge vessel for standard 65mm DOE cartridges. 10" - 20" length options. Polypropylene head with SAN see through bowl8 bar1/4" - 1" BSP
Model A103Two piece single cartridge, industrial style cartridge vessel for standard 65mm DOE cartridges. 10" - 20" length options. Polypropylene head with polypropylene bowl 8 bar1/4" - 1" BSP
Model A104Two piece single cartridge, industrial style cartridge vessel for standard 65mm DOE cartridges. 10" - 20" length options. Polypropylene head with brass screw thread inserts with polypropylene bowl8 bar1/4" - 1" BSP
Model A202Three piece single cartridge, industrial style cartridge vessel for standard 65mm DOE cartridges. 10" - 20" length options. Polypropylene head with SAN see through bowl8 bar1/4" - 1" BSP
Type A105Two piece all polypropylene industrial style cartridge filter housing for 105mm diameter type BB filter cartridges. 10" and 20" cartridge options available6 bar1" & 1 1/2" BSP
Type FHHOTTwo piece glass fibre reinforced nylon industrial style filter vessel for hot water and solvents. Normally supplied with brass screw thread inserts and a silicone O ring13.8 bar
93 deg C
3/4" BSP
Type FHPRThree piece single cartridge, industrial style cartridge vessel for standard 65mm DOE cartridges. 10" length option only. Polypropylene head with SAN see through bowl and flush valve6 bar1/2" - 3/4"
Type F10NNThree piece single cartridge, industrial style cartridge vessel for standard 65mm DOE cartridges. 10" length option only. Nylon head with see through bowl and flush valve8.6 bar
93 deg C
1/2" - 3/4"
Type FHTwo piece polypropylene filter housings supplied with filter element and wall mounting kit for use as a prefilter for Ultra violet units. Pressure gauge and bowl wrench included8 bar1/2" - 1" BSP

Your one stop shop for Polypropylene Cartridge Filter Housing requirements – Prosep Filter Systems Ltd.

Call today for advice and a quotation – 01422 377367